IBM Books

User's Guide

Figures

  1. Self-Learning IP in the network
  2. Front panel of the switch.
  3. LEDs for the switch.
  4. LEDs for the base 10/100BASE-TX ports on the switch
  5. LEDs for the 8-port 10/100BASE-TX feature module.
  6. LEDs for the 8-port 100BASE-FX feature module.
  7. LEDs for the 4-port 100BASE-FX feature module.
  8. LEDs for the 2-port 1000BASE-SX feature module.
  9. Out-of-band connectivity - locally attached terminal
  10. Out-of-band connectivity - remotely attached terminal
  11. In-band connection
  12. Configuring BootP/static DHCP and network connection (IP information).
  13. Login panel for terminal interface
  14. Main menu for terminal interface
  15. System information menu
  16. Inventory information menu
  17. System description menu
  18. Management menu
  19. Network connection configuration
  20. Serial port configuration
  21. SNMP community configuration
  22. SNMP trap receiver configuration
  23. Trap flags configuration
  24. Trap log
  25. Trap log status
  26. Telnet configuration
  27. Ping
  28. ARP cache
  29. Device configuration
  30. Switch configuration
  31. Port configuration
  32. Port monitoring
  33. Spanning tree switch configuration/status
  34. Spanning tree port configuration/status
  35. VLAN management menu
  36. VLAN summary and configuration
  37. VLAN Configuration Menu
  38. GARP configuration
  39. 802.1Q port configuration
  40. VLAN reset
  41. Trunk status menu
  42. Configure trunk menu
  43. Statistics Menu
  44. Port summary statistics
  45. Port detailed statistics
  46. Switch summary statistics
  47. Switch detailed statistics
  48. Self Learning IP statistics
  49. Forwarding database information
  50. Self Learning IP router table menu
  51. Self Learning IP host address menu
  52. User account management
  53. Login session management
  54. Save applied changes
  55. Logout utility
  56. Downloading a file to the switch
  57. Uploading a file from the switch
  58. System Reset menu
  59. System reset menu
  60. Reset configuration data to factory defaults
  61. Reset passwords to factory defaults
  62. Web interface panel-example
  63. Straight-Through UTP Cable (RJ-45 to RJ-45), T568A
  64. Straight-Through UTP Cable (RJ-45 to RJ-45), T568B
  65. Straight-Through STP Cable (RJ-45 to IBM Data Connector)
  66. Crossover UTP Cable (RJ-45 to RJ-45), T568A
  67. Crossover UTP Cable (RJ-45 to RJ-45), T568B
  68. Crossover STP Cable (RJ-45 to IBM Data Connector Crossover)
  69. Pinout of the EIA-232 Port
  70. EIA-232 Null Modem Cable for Terminal with 25-Pin Connector
  71. EIA-232 Null Modem Cable for Terminal with 9-Pin Connector
  72. An Example of VLANs
  73. Untagged device to untagged device configuration
  74. 802.1Q-compliant device (tagging and GVRP) to 802.1Q-compliant device (tagging and GVRP) configuration
  75. Untagged device to 802.1Q compliant device (tagging and GVRP) configuration
  76. Untagged device to 802.1Q-compliant device (tagging only) configuration

[ Top of Page | Previous Page | Next Page | Table of Contents | Index ]